The correct way to clean sheepskin coats should be dry cleaning. If you need to clean it at home, you need to follow the principle of gentleness and avoid high temperature and exposure. Professional dry cleaning can protect the material to the greatest extent, while home cleaning requires the use of neutral detergents, soft brushes and natural drying.

1. Professional dry cleaning is preferred Send it to a professional agency for dry cleaning: Fur-and-leather clothing is made of special materials. Dry cleaning can avoid problems such as leather hardening and fur shedding caused by water washing. It is especially suitable for expensive or large-area stained clothing.
2. If you need to clean it yourself, you need to strictly follow the following steps:
Preliminary dust removal: First use a soft brush to gently brush away dust and debris on the surface of the coat. Remember to brush along the texture of the leather.

Spray wet: Take out a small spray bottle and spray some cold water on the surface of the fur-and-leather. Just moisten it slightly. Don't spray too much.

Cleaner treatment: Spray some professional leather cleaner on the stain and wait a few minutes for the cleaner to fully react with the stain. Then gently wipe off the stain with a sponge or soft cloth, also wiping along the leather texture.

Rinse with clean water: Wipe the coat clean with clean water, be careful not to use too high a water temperature, cold water will do.

Dry the water: Use a dry towel to absorb excess water, and avoid wringing it with water, otherwise the clothes may be deformed!

Ventilation and drying: Put the coat in a ventilated place to dry, remember to avoid direct sunlight, otherwise the leather will fade.